P80 Line-Interactive UPS – 800–3000 VA 120V Rack/Tower UPS
800–3000 VA | 120V | Line-Interactive UPS
Rack-mounted UPS platform engineered for distributed infrastructure requiring efficient power protection, voltage regulation, and standardized deployment across multiple sites..
The P80 Series is a line-interactive rack UPS designed for network, AV, and distributed IT environments where continuous power conditioning is not required but reliable battery backup and voltage regulation are essential.
It provides rack-level continuity across multiple infrastructure locations while maintaining high efficiency and simplified deployment compared to online double-conversion systems.
P80 is commonly deployed in IDF/MDF environments and network closets as part of a standardized rack power architecture.
Key Specifications
- 800 / 1500 / 2200 / 3000 VA
- 120V single phase
- Line-interactive topology
- Pure sine wave output
- Automatic Voltage Regulation (AVR)
- Rack / tower convertible
- Internal VRLA batteries with optional external expansion
Datasheet:
https://xpcc.com/wp-content/uploads/p80_flyer.pdf
Efficient Rack-Level Power Protection
P80 is designed for environments where utility power is relatively stable and full-time double conversion is not required.
Line-interactive topology regulates voltage using AVR while maintaining high operating efficiency. During outages, the system transfers to battery to support ride-through and controlled shutdown of connected equipment.
This provides a practical balance between protection, efficiency, and cost for distributed infrastructure.
Where P80 Fits
P80 operates as the standard line-interactive UPS platform within distributed rack environments.
It is typically deployed:
- across multiple racks within IDF/MDF environments
- in telecommunications and structured cabling systems
- in AV, security, and commercial infrastructure
Within the Xtreme Power architecture:
- A60 / S71 → entry-level UPS
- P80 → line-interactive rack UPS (this platform)
- P80g → global 208–240V equivalent
- P91 → online UPS for higher protection requirements
- J90 → high-density lithium UPS
P80 vs Online Double-Conversion UPS
Compared to online UPS platforms, P80 is designed for applications where full-time power conditioning is not necessary.
It offers higher operating efficiency, lower system complexity, and reduced cost while still providing battery backup and voltage regulation.
Online UPS systems such as P91 are typically selected when zero transfer time, generator coordination, or highly sensitive loads require continuous conditioning.
Replace APC / Eaton Line-Interactive UPS
P80 is commonly deployed as a replacement for legacy rack UPS systems including:
- APC Smart-UPS SMT series
- Eaton 5P and similar line-interactive platforms
- Vertiv Liebert PSI systems
It provides a standardized platform for distributed infrastructure with simplified deployment and consistent lifecycle management across multiple sites.
Detailed comparisons:
https://xpcc.com/p80-ups-comparisons/
Rack Integration and Power Distribution
P80 supports multiple output receptacles, allowing a single UPS to protect multiple devices within a rack.
It is commonly deployed with rack-mounted power distribution, including intelligent PDUs (see https://xpcc.com/spdu-rack-pdu-120v/), to enable outlet-level control, monitoring, and simplified power management.
This combination provides a standardized approach to rack-level power across distributed environments.
Runtime Architecture and Deployment Flexibility
Internal batteries provide standard ride-through capability, while optional external battery expansion supports extended runtime when required.
This allows runtime to be adjusted based on application needs without changing the UPS platform, supporting consistent deployment across multiple sites.
UPS sizing tool:
https://xpcc.com/selector
Typical Applications
P80 is deployed across distributed infrastructure environments including:
- network closets and structured cabling systems (see https://xpcc.com/ups-for-idf-mdf-closets/)
- telecommunications infrastructure
- AV and security systems
- commercial IT and retail environments
It is particularly well suited for multi-site deployments where a consistent, efficient UPS platform is required.
Capacity Guidance
Capacity selection is based on load and deployment scale:
- 800–1500 VA → small racks, security systems, edge devices
- 2200–3000 VA → network infrastructure and distributed IT
P80 is typically standardized across multiple sites to simplify lifecycle management and spare strategy.
Technical Summary
- Topology: Line-interactive
- Capacity: 800–3000 VA
- Voltage: 120V
- Battery: VRLA (internal + optional expansion)
- Form Factor: Rack / tower
- Runtime: Expandable
- Function: Voltage regulation and battery backup
Plan With Confidence
Xtreme Power Conversion supports UPS selection, capacity planning, and distributed rack architecture design across enterprise and commercial environments.
(800) 582-4524
sales@xpcc.com
| MODEL NUMBER | P80-800 | P80-1100 | P80-1500 | P80-2000 | P80-2200 | P80-3000(V2) | |
| CAPACITY | Power rating | 800VA (720W) | 1100VA (990W) | 1500VA (1350W) | 2000VA (1800W) | 2200VA (2000W) | 3000VA (2700W) |
| INPUT | Voltage nominal | 120VAC | |||||
| Voltage range | -32% to +27% without use of battery | ||||||
| Frequency | 50/60Hz auto-sensing | ||||||
| OUTPUT | Voltage | 120VAC nominal (110/115/127 selectable) | |||||
| Waveform | Pure sine wave | ||||||
| Transfer time (typical) | 2–6ms | ||||||
| Efficiency | Up to 99% ECO mode, 95% buck and boost mode | ||||||
| Harmonic distortion | 2% @ 100% linear load; 5% @ 100% non-linear load | ||||||
| BATTERY | Battery type | Sealed, maintenance-free lead acid | |||||
| Battery quantity/size | (2) 12V 7AH | (2) 12V 9AH | (4) 12V 7AH | (4) 12V 9AH | (6) 12V 7AH | (6) 12V 9AH | |
| Charging current | 1.5A max | ||||||
| Typical recharge | 4 hours to 90% | ||||||
| PHYSICAL | Dimensions (W x D x H) | 17.2 x 15.1 x 3.5 in | 17.2 x 18.9 x 3.5 in | 17.2 x 23.6 x 3.5 in | |||
| Weight | 29.3 lbs | 30.5 lbs | 44.7 lbs | 47.4 lbs | 61.7 lbs | 67.1 lbs | |
| Line cord | 6 ft, 5–15P | 6 ft, 5–15P | 6 ft, 5–15P | 6 ft, 5–20P | 6 ft, 5–20P | 6 ft, L5–30P | |
| Receptacles | (8) NEMA 5–15R | (8) NEMA 5–15/20R | (8) 5–15/20R or (6) 5–15/20R + L5-30R (V2) | ||||
| OPTIONAL | Model number | N/A | P90-BP48 | P90-BP72 | |||
| BATTERY PACKS | Dimensions (W x D x H) | N/A | 17.2 x 18.9 x 3.5 in | 17.2 x 23.6 x 3.5 in | |||
| Weight | N/A | 74.6 lbs | 104.4 lbs | ||||
| Battery | N/A | (8) 12V 9AH / 48V | (12) 12V 9AH / 72V | ||||
| ENVIRONMENT | Operating temperature | 32–104°F (0–40°C) | |||||
| Audible noise | < 45dBA | ||||||
| Altitude | 11,500 ft above sea level | ||||||
| APPROVALS | UL, cUL, RoHS, TAA compliant | ||||||
| WARRANTY | 3 years electronics, 3 years battery warranty (USA and Canada) | ||||||
| COMMUNICATIONS INTERFACE | RS-232, USB, EPO, intelligent slot for optional cards (Web/SNMP, Relay/dry contact, Modbus) | ||||||
| INCLUDED IN BOX | Software CD, horizontal brackets, tower pedestals, user manual | ||||||
| AVAILABLE OPTIONS | 5 year extended warranty, bypass distribution (XBDM), power distribution (XPDU), 4-post rail kit, 2-post shelf kit, wall mount bracket | ||||||
-
UPS Battery Packs
[table colwidth=”75″]
,Model,Description,Unit Weight, Unit Dimensions
,P90-BP48,”48V Battery Pack for P80-1500, 2U”,74.6 lbs,17.2” x 19.9” x 3.5”
,P90-BP72,”72V Battery Pack for P80-2200, P80-3000, 2U”,104.4 lbs,17.2” x 24.6” x 3.5”
[/table] -
Mounting Kits
[table colwidth=”75″]
,Model,Description,Unit Weight, Unit Dimensions
,P90-RAIL,4-Post Rail Kit,5 lbs,3.8″ x 19.8″ x 2.8″
,XPC-2PRAIL,2-Post Rail Kit; Rated for 125 lbs,5 lbs,4.0” x 20.0” x 3.0”
,XPC-2POSTL,2-Post Shelf Kit; Rated for 150 lbs,9 lbs,21.5″ x 23.3″ x 3.5″
,P90-WMB,Wall Mount Bracket,5 lbs,4.0″ x 24.0″ x 4.0″
,P90-FRMB,”Front Rackmount Bracket for P90-1000, P90-1500, P90-2000″,1 lb,0.9″ x 2.0″ x 3.4″
[/table] -
Connectivity
[table colwidth=”75″]
,Model,Description,Unit Weight, Unit Dimensions
,SNMP-2PMINI,Two Port Internal SNMP Card,1 lb,7.25″ x 6″ x 2.5″
,SNMP-EMD,Environmental Monitoring Device,1 lb,7.25″ x 6″ x 2.5″
,MODBUS-IN,Modbus Card,1 lb,7.25″ x 6″ x 2.5″
,RELAY-MINI,General Relay Contacts with DB9 & Terminal Block Adapter,1 lb,7.25″ x 6″ x 2.5″
[/table] -
Bypass Distribution Modules
[table colwidth=”75″]
,Model,Description,Utility Input, Output Connections, UPS Connections, Unit Weight, Unit Dimensions
,XBDM-1015LV,”Bypass 15A/120VAC for use with P80-800, P80-1100, P80-1500″,”5–15P, 12ft”,”(6) 5–15R front, (4) 5–15R back”,5-15R,3.4 lbs,19” x 3.5” x 1.75”
,XBDM-1020LV,Bypass 20A/120VAC for use with P80-2200,”5–20P, 12ft”,”(6) 5–20R front, (4) 5–20R back”,5-20R,3.4 lbs,19” x 3.5” x 1.75”
[/table] -
Power Distribution Units
[table colwidth=”75″]
,Model,Description,Input Power Cord, Outlets, Unit Weight, Unit Dimensions
,XPD-1415HV,120V Basic Power Distribution Unit,”5–15P, 12ft”,(14) 5–15R,3.5 lbs,19.0″ x 3.5″ x 1.75″
,XPD-1420HV,120V Basic Power Distribution Unit,”L5–20P, 12ft or 5–20P with adapter”,(14) 5–25R,4.8 lbs,19.0″ x 3.5″ x 1.75″
[/table]
