650VA · 230V · Short-Depth Lithium Rack UPS Comparison

Eaton 5P650IR replacement — Xtreme Power J60Ci-600

The Eaton 5P650IR has long been deployed in telecom racks, network closets, and distributed IT as a compact 1U rackmount UPS. As organizations replace aging or discontinued 5P650IR units, many move to platforms with longer battery life, less maintenance, and easier installation. The Xtreme Power J60Ci-600 is a compact lithium alternative built for shallow racks — an ultra-short 216 mm depth, a lightweight design, and long-life LiFePO4 batteries.

Xtreme Power
J60Ci-600
vs
Eaton
5P650IR
Key advantages of the J60Ci-600

Why it replaces the 5P650IR

  • Lithium Iron Phosphate (LiFePO4) battery technology
  • Up to 15-year battery service life
  • Ultra-short 216 mm (8.5 in) rack depth
  • Lightweight 3.5 kg design
  • Longer runtime under full load
  • Five IEC C13 output receptacles
  • Optional SNMP / network monitoring
  • LCD display with system diagnostics
Side-by-side

650VA rack UPS comparison (230V)

FeatureXtreme Power J60Ci-600Eaton 5P650IRAdvantage
Battery chemistryLiFePO4Sealed lead-acid (VRLA)J60Ci – longer life & thermal stability
Battery lifeUp to 15 years / 3,000-5,000 cyclesTypically 3-5 yearsJ60Ci – fewer replacements
Rack depth216 mm (8.5 in)364 mm (14.3 in)J60Ci – much shorter
Weight3.5 kg (7.7 lb)8.3 kg (18.3 lb)J60Ci – much lighter
Runtime (full load)6 min @ 360 W2 min @ 420 WJ60Ci – longer runtime
Output receptacles(5) IEC C13 – 4 battery backup + 1 surge(4) IEC C13J60Ci – additional outlet
Capacity600 VA / 360 W650 VA / 420 WComparable
MonitoringOptional Web/SNMP cardOptional network cardComparable
DisplayLCD displayLCD displayEqual
Rack height1U1UEqual
Warranty5 years3 yearsJ60Ci – longer coverage

Specifications based on publicly available manufacturer data; verify against current Eaton documentation. Runtimes shown at each unit’s full load and vary with battery age and site conditions.

A modern replacement

Replacing aging 5P650IR installations

The 5P650IR has been widely used in telecom racks and network cabinets to protect networking equipment and distributed IT. Organizations replacing older units typically want longer battery service life, fewer replacement cycles, improved rack efficiency, lighter equipment, and modern monitoring. The J60Ci-600 addresses all of these in a compact 1U footprint – and its LiFePO4 chemistry avoids the periodic VRLA battery swaps that drive the lifetime cost of lead-acid units.

Why rack depth matters

Built for shallow cabinets

Many network cabinets, telecom racks, and wall-mount enclosures have limited depth. Traditional rack UPS systems like the 5P650IR measure roughly 364 mm deep, which constrains installation in shallow cabinets. At just 216 mm, the J60Ci-600 fits shallow wall-mount network cabinets, telecom racks, retail IT installations, branch-office infrastructure, and IDF/MDF closets – without interfering with cable management or airflow. UPS for network infrastructure ->

Need help selecting a replacement UPS?

The Xtreme Power team can evaluate your installation and recommend the right platform on rack depth, battery technology, runtime, and lifecycle cost.