P91-3000 vs Eaton 9PX3000RT
The P91-3000 and Eaton 9PX3000RT are both true online double-conversion VRLA UPS delivering continuous sine-wave output for critical IT, network, AV, and edge infrastructure. The P91-3000 differentiates with higher usable watts, much faster recharge, greater runtime scalability, and full TAA compliance.
What the P91-3000 brings
- Higher usable watts (2880 W vs 2700 W)
- Much faster recharge (<3 h vs 8 h)
- Greater runtime scalability (up to 7 packs vs 4)
- Programmable 1–8 A charger vs a fixed charger
- Better high-altitude rating and full TAA compliance
Side-by-side specifications
| Specification | Xtreme Power P91-3000 | Eaton 9PX3000RT | Advantage |
|---|---|---|---|
| Capacity | 3000 VA / 2880 W | 3000 VA / 2700 W | P91 – higher usable watts |
| Topology | Online double-conversion | Online double-conversion | Equal topology |
| Battery chemistry | VRLA | VRLA | Equal |
| Recharge time | <3 hours | 8 hours | P91 – much faster recharge |
| Extended runtime | Up to 7 external packs | Up to 4 external packs | P91 – greater scalability |
| Charger | Programmable high-capacity (1–8 A) | Fixed charger | P91 – faster with large strings |
| Dimensions (W×D×H) | 17.2 × 24.8 × 3.4 in | 17.2 × 23.8 × 3.4 in | Comparable footprint |
| Weight | 60.6 lb | 63.1 lb | Comparable weight |
| Operating altitude (40°C) | Derates above 6,500 ft | Derates above 4,921 ft | P91 – better at altitude |
| TAA compliance | Yes | No | P91 – federal procurement |
| Warranty | 3 years | 3 years | Equal coverage |
Specifications from Xtreme Power’s supplied P91-3000 vs Eaton 9PX3000RT comparison; confirm against current vendor documentation. At 3 kVA the footprint and weight are comparable (the Eaton is marginally shallower).
Choosing between them
Equivalent online VRLA protection and warranty, with comparable 3 kVA footprint and weight. The P91-3000 leads on usable watts, recharge, runtime scalability, charger, altitude, and TAA; the Eaton fits Eaton-standardized, controlled environments.
Choose the P91-3000 if you need
- Long-runtime installs needing fast recharge and scalable expansion
- Federally funded and TAA-restricted procurement
- Edge, IDF, and MDF deployments with higher-density loads
- Sites at higher elevations or warmer ambient conditions
The 9PX3000RT may fit if you need
- Existing Eaton-standardized UPS environments
- Modest / standard runtime requirements
- Well-cooled, low-altitude IT rooms where TAA isn’t required
Related comparisons
Specifying a scalable-runtime online UPS?
Xtreme Power supports UPS selection, runtime sizing, and distributed infrastructure design across IT, networking, AV, and regulated environments.